ZCory Plus V2 – Dissipatore originale Zortrax

67,10 22% Iva inc.

New Hotend

Z-CoryPlus V2 Hotend

 


100% Made in Italy by Keytech

Esaurito

COD: ZCory_Plus_Zortrax-V2 Categoria: Tag: , , , , , , , , , , , ,

Descrizione

Filament Diameter 1.75 mm
Compatible  Zortrax M200/M200Plus/M300/M300 Plus
Rigid Material YES
Flexible Material YES
Copertura nozzle in silicone E’ Motorsil D Rosso, va sosituito ogni volta che si cambia il nozzle.

Necessario solo per stampare filamenti in pla, wood e gomme molto morbide

It is a new extruder for M200, M300, M200 Plus, M300 Plus

* questo estrusore ha un alta barriera termica ed un blocco alluminio ridotto rispetto all’estrusore originale, quindi i settaggi e le regalazioni dei filamenti saranno diversi (temperature mediamente 20-30°C in meno rispetto all’estrusore originale).

Features:

1. Has half the height of the alu block compared to the original, so it feels better retractions with materials that tend to make stringing as zpetg, zglass, high flexible rubber;

2. Has its own heatsink composed of two throats that help to dissipate and the higher one by touching with the original heatsink transmits more heat to the heatsink itself;

3. The wall of the throat that touches the heat sink creates a greater contact surface also for the passage of the signal during bed leveling, so it will save several platform from drilling;

4. Nozzle M6 compatible with all M6 in the world;

5. Can be installed on M200, M300, M200 Plus, M300 Plus;

6. The smallest alu block allows go fast into heat and keep it better;

7. Compatibily with all kind of Zvent upgrade ventilation system;

8. Alu block reduced;

9. screw block for heater and thermistor

 

 

 

Informazioni aggiuntive

Peso 0.10 kg

HOW ADD RED SILICON ON NOZZLE (1)

 

 

Recensioni

Ancora non ci sono recensioni.

Recensisci per primo “ZCory Plus V2 – Dissipatore originale Zortrax”

Il tuo indirizzo email non sarà pubblicato. I campi obbligatori sono contrassegnati *